Posts Tagged ‘Rumson’

« Older Entries

Hamilton HVAC Guide: Heat Pump Refrigeration Problems

Monday, April 23rd, 2012

Your Hamilton heat pump is a very complicated piece of equipment that uses a number of moving parts to compress and circulate refrigerant and extract heat from one environment and place it in another. So, if your heat pump has refrigeration problems, it will almost certainly cause problems for the heating or cooling of your home.

Common Refrigeration Problems

There are a number of potential problems your Hamilton heat pump might face, especially as it begins to age and components become worn. Some common issues include:

  • Compressor Issues – The compressor is a component in your heat pump that compresses the refrigerant gas into a liquid. This liquid is what circulates through the device and extracts heat from the outside air (or inside your home when in cooling mode). If the heat pump doesn’t turn on properly, isn’t producing enough heat or is using a large amount of electricity suddenly, it may be a compressor problem.
  • Refrigerant Leaks – Your heat pump doesn’t consume any refrigerant during operation. So, if it starts to leak refrigerant, there is likely another problem and it should be repaired immediately (for health and environmental reasons). Common signs of a leak include suddenly higher electrical bills, inefficient heating and possibly even a faint odor near the device.
  • Freezing Up – If your heat pump freezes, you should check for any blocked air vents or registers, check the condensate line and check your filter for blockage. Most often, a freezing problem is directly related to something being clogged and is a relatively easy fix. The only way to know for sure is to call a professional to investigate, however.

A heat pump is a very complex piece of machinery with a number of moving parts that can all cause issues if not properly maintained. If your heat pump stops heating or cooling effectively and it is not a simple fix such as a filter or belt, you should call Heritage Air & Heat to inspect for more significant problems such as the compressor or refrigerant.

Tags: , , , , ,
Posted in Services | Comments Off

Jackson Heating Question: Can Your Heating System Warn You of a CO Leak?

Wednesday, February 29th, 2012

As everyone in Jackson knows, carbon monoxide is a serious health risk. It is an odorless gas that is produced as a natural byproduct of combustion. So, any time something burns, carbon monoxide (CO) is released into the air.

As long as the area is properly ventilated, the carbon monoxide cannot build up in the air to a dangerous level of concentration. For example, if you are around a campfire or charcoal that is burning outside, you are generally safe.

In the home, the danger arises when combustion is not properly ventilated and this toxic gas is allowed to seep into our living spaces. If you use any gas, fuel or wood burning appliances in your home, you are at risk for exposure to carbon monoxide. To help mitigate that risk, it is important to know some warning signs. Your heating system gives off some warnings that can tip you off to danger, so be on the lookout for these three signals:

  1. Carbon monoxide detector goes off. Some heating systems these days have built-in carbon monoxide detectors, which can provide an extra measure of safety. Whether you have one of these systems or not, your home should still be equipped with a CO detector. If it begins sounding the alarm, get everyone out of the house immediately.
  1. A fume vent is leaking. Fuel-burning furnaces have vents to move combustion gases out of the house safely. If you notice this vent is leaking on your heating system, CO may be seeping into your house. Shut down the furnace, open windows for ventilation and have the fume vent repaired immediately.
  1. Smoke backing up from the fireplace. If you have a fireplace and you notice smoke in the room while using it, stop using it immediately. Your chimney may be blocked or leaking, preventing the smoke from rising and venting properly, which means CO can e getting into your house. Do not use the fireplace again until you have had the chimney inspected.

Please take care and note this is just a simple guide. There are other risks and warnings of carbon monoxide. If you have any suspicion that there is something wrong with your Jackson home’s heating system, give Heritage Air & Heat a call!

Tags: , , , , , ,
Posted in Services | Comments Off

Point Pleasant Heating Repair Tip: Things to Try Before Calling a Professional

Friday, February 24th, 2012

Your Point Pleasant home’s HVAC system can seem like very daunting and complex equipment, so you might not want to work on by yourself. While it’s true that HVAC equipment can be complicated and needs the attention of a skilled professional more often than most homeowners would like, there are still ways for the DIY-ers out there to work on their HVAC systems before resorting to calling in the pros.

There are some common culprits when it comes to most HVAC problems and malfunctions, so if something goes awry in the operation of your equipment, there are some basic measures you can try to get things back on track.

If any of these work, you have saved the cost of the repair and get the satisfaction of a job well done:

  • Turn all switches – indoors and outdoors – off, then back on again. Do the same thing with the pertinent circuit breakers. Sometimes the system just needs a hard reset to jolt it back to life.
  • Check your thermostat. Is the temperature set where it is supposed to be? If it is too high or too low, the HVAC system will stay on too long or shut itself off too quickly.
  • Make sure your system is in the right mode for the season. It may sound obvious, but for whatever reason, sometimes things wind up in heating mode during cooling season.
  • Check your filters. Clean and/or replace them as necessary. (You do this once a month anyway, right?)
  • Inspect the vents around your home to see if any are blocked, clogged or excessively dirty. Vents that don’t properly circulate the air can cause all kinds of problems within an HVAC system.

This is by no means a comprehensive list of all the things that can go wrong with an HVAC system, but it is at least the usual suspects for the most simple and common problems that many Point Pleasant homeowners encounter. After trying these out, if you are still experiencing difficulties, then it is probably time to call Heritage Air & Heat to have a look at the problem.

Tags: , , , ,
Posted in Services | Comments Off

Marlboro Heating Tip: Things You Can Do to Make Your Heating and Cooling System More Effective

Wednesday, February 8th, 2012

Have you ever wondered why it is too hot or too cold in your Marlboro home? You can always blame it on the thermostat or an open or closed window. Those are easy targets. But maybe the real culprit is your heating and cooling system, namely your furnace or air conditioner. Maybe these pieces of equipment have to work extra hard because of something as simple as a dirty filter that you should have cleaned or replaced.

Learning how to make your heating and cooling system more “effective” does not require a physics degree or an extensive knowledge of the refrigeration cycle. In most cases, it just takes common sense – and a little creativity.

For example, did you know that how your home is insulated can have a direct impact on how well your heating and cooling equipment functions? It sure can. If your walls, crawl spaces, or attic is poorly insulated or not insulated at all, your furnace and air conditioner will have to work harder to keep up – and keep you warm or cool. In some cases, your heating and cooling equipment might never be able to give you the desired temperature on your thermostat setting because the equipment has to work too hard to make up for lost heat or cooling due to poor insulation.

So what should you do? Find out if your home is properly insulated by having a load calculation or energy audit on your home. Windows and skylights are also an area of heat loss or gain. Installing awnings or trees can cut down on this loss or gain, too.

One way to make a heating and cooling system operate more effectively is to combine insulation and leak sealing. Here’s how that works. Uninsulated metal ductwork can make a heating and cooling system work harder, especially when it is located in poorly insulated areas like crawlspaces and attics. Warm air moving through a cold space slows the heating process and makes a furnace work harder to achieved desired temperature settings. Similarly, cool air passing through hot metal ductwork makes the air conditioner work harder. By wrapping insulation around the metal ductwork, you can stop heating or cooling your attic and crawlspace and send that conditioned air to the rooms that need it.

Another way to “assist” your heating and cooling system is to help with its air flow. In some homes, floor vents are built near outside walls or windows. Warm or cool air is vented up along the walls and windows and never flows evenly in the room. The solution is to buy inexpensive plastic air diverters which attach to the vents using magnets on the diverter. You can adjust the diverter to changing the air flow to the places that need it most – occupied spaces.

Of course, the most effective heating and cooling system is one that is serviced and properly maintained on a regular basis. If you have any questions on system maintenance, call Heritage Air & Heat and schedule a tune-up today.

Tags: , , , , , ,
Posted in Services | Comments Off

Rumson Heat Pump Tip: Outdoor Maintenance

Wednesday, January 25th, 2012

Sometimes, the trickiest part about owning a heat pump in Rumson is keeping the outdoor components maintained. Because they are outside and generally out of sight, it can be easy to forget or neglect them. But because they are outside and exposed to the elements, outdoor heat pump components need attention and maintenance to keep them running properly.

The two most important routine maintenance functions you can do as an owner of an outdoor heat pump are keeping it free of debris and keeping it level.

Every month or so, inspect and clean your outdoor heat pump to make sure it is free of leaves, dirt and other debris. These can easily be sucked in by the fan and reduce the efficiency of the whole system. Turn the power off to the unit and use a vacuum or broom to remove any accumulated debris.

Once or twice a year, use a carpenter’s level to make sure the whole thing is sitting level on the pad. Use the level to gauge both side to side and front to back. While you are doing this, check the insulation for erosion or gaps. If you see that it is not level or the insulation is wearing thin, have a contractor come out reset the unit on the concrete pad or patch up the insulation.

These are two small maintenance tasks that you don’t have to do very often, but they can make a big difference in the performance and life of your heat pump. In addition, you should always have your Rumson home’s heating, ventilation and cooling system inspected by a professional annually in order to keep everything maintained and in good repair.

Tags: , , , , ,
Posted in Services | Comments Off

What is a Green Building? A Question from Rumson

Monday, October 17th, 2011

A green building is environmentally responsible and resource-efficient throughout its life-cycle, minimizing the building’s impact on human health and the natural environment. If you are thinking about building one in Rumson, here is what you need to know.

Some of the criteria that can go into evaluating a green building include:

  • Location
  • Design
  • Construction
  • Operation
  • Maintenance
  • Renovation
  • Demolition

Of course, there are many different kinds of green buildings, each with its own particular strengths. Here are a few:

Buildings located in New Urbanist communities. New Urbanism is an urban design movement that promotes walkable neighborhoods with multi-use buildings so that residents can live, shop, and work within their local area. The goal is to promote community, reduce the amount of energy used for transportation, and reduce emissions from car travel.

Net-zero buildings. A net-zero building produces renewable energy equal to or greater than the energy the home consumes from public utilities. A net-zero building saves energy by being extremely energy efficient, and by generating its own renewable power using solar, wind, micro-hydro, or geothermal systems.

“Ultra-small” homes. Super-small houses (30 square meters and even smaller!) are a growing trend in home design. Tiny spaces dramatically reduce the occupants’ energy use – in some cases, the entire home can be run on the equivalent of a couple of light bulbs.

Buildings constructed with local, natural materials. Homes made of earth, straw bales, stone, stucco, and other natural materials are often cheaper to build and require much less gas for transporting construction materials. They can also be extremely energy-efficient to operate because the building materials are suited to the climate.

Buildings constructed entirely or in part with reclaimed materials. Recycling keeps building materials out of the landfill and reduces the energy needed to manufacture new items. One commonly-used reclaimed material is shipping containers, which are strong, cheap, and can be assembled in a modular fashion to create homes of any size.

R-2000-certified buildings. R-2000 is a voluntary standard administered by Natural Resources Canada (NRCan) that evaluates three main areas of construction: energy performance, indoor air quality and use of environmentally preferred materials. Builders are given the freedom to choose the best and most cost-effective way to achieve the R-2000 goals, which means they can incorporate any of the techniques or building styles described above.

LEED-accredited buildings. Probably the best-known green building accreditation system, LEED offers third-party verification that a home is above average in the following areas: sustainability of building site, water efficiency, energy use of heating and cooling systems, sustainability of materials, use of resources, indoor environmental quality, location, transportation connections, and innovation in design. LEED-accredited homes are extremely efficient to operate and have a high resale value.

Tags: , , , , ,
Posted in Services | Comments Off

How to Get My Furnace Ready for Winter: A Guide From Rumson

Friday, October 14th, 2011

Being cold in the winter is normal – as long as you are outside. But you shouldn’t be cold inside your Rumson home. If that happens, the first place to look to is your furnace, which may not be working correctly. Furnaces are like any other piece of mechanical equipment. They need to be maintained and serviced on a regular basis to ensure they are working at peak efficiency and warming your entire home at your desired comfort level.

The best time to get your furnace ready for winter is not during the cold winter months – it is before the winter season even begins. There are several way to get your furnace ready for winter and let’s explore some of them.

First of all, check and see when you last had your furnace serviced. If it has been over one year ago, you should schedule and maintenance inspection from your local heating and cooling professional. And when you make that appointment, ask about service agreements and getting on a regular maintenance schedule. Most heating and cooling contractors offer service agreement plans which include furnace and air conditioning check-ups on an annual basis.

Okay, so you know who to call for maintenance but what can you do yourself? First of all, give your furnace a little “help” by checking the vents and returns throughout the house. Ensure that there are no obstructions or blockages such as rugs, clothing, furniture, etc. You need to have unobstructed paths for your heated and return air to flow. The more congested the path, the harder your furnace will have to work. And while you’re at it, make sure your vents are open or closed, depending on how much you use your rooms. For example, if you have an extra bedroom that doesn’t need to be heated, closed off the vent or close the damper in the ductwork. The heated air will be diverted to other parts of your home where it is needed.

You can also help the airflow by vacuuming the vent cover or removing it and vacuuming any of the ductwork that you can easily get to. For a more thorough job consider calling a qualified and professional duct cleaning contractor. Many heating and cooling contractors also offer duct cleaning service, too.

Another maintenance function that you can perform is cleaning or replacing the furnace filter. Depending on the size of your home and its air quality (occupants, pets, etc.), you may want to clean or replace your air filter every one to three months. A dirty filter can restrict airflow and can put contaminants like dirt and dust right back into your air system. If you don’t know how to replace your air filter, consult the furnace owner’s manual or go online to learn more. If your furnace uses an electrostatic air filter, it will need to be removed and cleaned, either by using a hose or with soapy water and a hose. Make sure you let it dry before re-installing it.

You may also want to inspect any electrical wires around your furnace to ensure none are broken or frayed. A visual inspection should be good enough.

Once you have done what you can, let your heating and cooling professional take over from there. They are licensed and trained to inspect your furnace and ensure that it is in peak operating condition. And do it today – while everyone else is waiting.

Tags: , , , , ,
Posted in Services | Comments Off

Why Choose a Programmable Thermostat? A Question From Red Bank

Wednesday, September 28th, 2011

There are many types of thermostats available for your Red Bank home, but which is the best for your particular needs? It depends largely on how often you are home, how many rooms you have and how people in your house use each of those rooms.

A programmable thermostat in particular is a great option because it allows home owners to control when and how much heat or cooling is introduced to their indoor air. Normal thermostats lack this level of control, largely because they are built as simple switches that flip on whenever your temperature gets too low or too high.

Situations for a Programmable Thermostat

When you leave your home every day, you have two options. Either set the heat and AC so you’ll be comfortable when you return, or turn them off completely and suffer through the first half hour or so when you get home that night.

If you choose the former, you’ll pay a lot more in energy bills to heat or cool an empty house. Those in the second camp are forced to endure uncomfortable temperatures right when they get home and want nothing more than to relax. Not much better.

That’s why so many homeowners are opting for programmable thermostats to overcome this issue. With a programmable model, you can actually tell your home’s comfort system when to turn on and off each day, depending on when people will be there. Imagine going on vacation for three or four days and coming home to a nice and toasty living room and a smaller heating bill to go with it. That’s the kind of control a programmable model offers.

Zone Control and Beyond

Some programmable thermostats even allow you to section your home off into zones and choose specific temperatures for different areas of the house. This allows a great deal more control over when and how your system will operate each day, depending on the individual comfort needs of your family.

If you’re making dinner and don’t want the heat blasting you while you’re standing over the stove, just set the kitchen temperature lower. And with a programmable thermostat, you can tell it to come back on an hour after you leave the kitchen so that it’s comfortable later when you need a glass of water.

Tags: , , , , ,
Posted in Services | Comments Off

What Is the Single Biggest Money-Saver Upgrade You Can Make? A Tip From Rumson

Wednesday, September 21st, 2011

While it would be great if there was a simple answer to this question, the real right answer depends to a great extent on your own particular situation in your Rumson home. There are literally dozens of steps you can take to save on your home heating and cooling costs, and which ones are most appropriate for you will have a lot to do with what you already have, how you use it and where you live.

For instance, if you have a well-insulated house but your HVAC system is more than 10 or 15 years old, investing in a new system will almost certainly save you a ton in the long run. Even if your existing system is working well, the newer systems available are simply so much more energy efficient that having one will cut your monthly bills dramatically.

Plus, you will be replacing your system relatively soon anyway if it is that old, so you might as well start saving now on your heating and cooling costs. However, even the best heating and cooling system on the market will not save you that much money if you do not have a properly insulated and sealed house.

If you have an energy efficient HVAC system, your thermostat might be the place to look when you want to try and cut your energy costs. A programmable or wireless thermostat might be just the ticket you need to cut back even more on your energy bills because of the added control it gives you to more precisely regulate the temperature inside your home.

Particularly if you have a large house, you might even consider having a zone control system put in so that you can set different temperatures for different areas of the house. After all, there is no need to be paying to regulate the temperature in a part of the house that is unoccupied.

Tags: , , , ,
Posted in Services | Comments Off

How to Improve Your Indoor Air Quality in Princeton

Friday, August 12th, 2011

When we think of air pollution in Princeton we often think of outdoor “smog”, but the air in your home or office may also be polluted, even if it looks clean. Sources of indoor pollution include

  • Mold
  • Pollen
  • Cigarette smoke
  • Household cleaners
  • Household décor and furnishings (like rugs and paint)
  • Household pesticides (like rodent or ant-killers, or plant sprays)
  • Radon
  • Carbon monoxide
  • Building materials (like asbestos and lead)

Indoor air quality is of particular concern in newer, better-insulated homes, or in older homes that have been recently weatherized. The “tightness” of modern houses means that any pollutants that get into the home stay there – and perhaps even increase in concentration over time if the source of the pollution is inside the house.

Indoor air quality problems can cause discomfort and even serious disease, especially in children. The good news, though, is that there are many effective ways to improve indoor air quality.

There are three basic strategies for improving indoor air quality:

  • Air purification. Air cleaners range from small tabletop models to full-house models that are part of the central heating and cooling system. Small air purifiers are typically not very useful, but central air filters can be very effective at removing airborne contaminants. If your heating and cooling system does not include central air filtration, you should consider an upgrade to a new system. It is important to note that air purification will not remove gases like carbon monoxide or radon from your home. Gas pollution must be remedied by professionals.
  • Ventilation. Many forced-air heating and cooling systems do not bring outdoor air into the home. Kitchen and bathroom exhaust fans and attic ventilation fans (when weather permits) can be very important in promoting the circulation of air. Also, opening windows is very important, especially when doing short-term activities such as painting that increase the number of pollutants in the air. You should also consider upgrading to one of the newer central heating and cooling systems that bring outdoor air into the home.
  • Source control. This is the most important indoor air quality strategy, and in many cases, the simplest one. Source control is definitely the most cost-effective strategy for improving indoor air quality, because purification and ventilation both require a constant use of energy. Switch to all-natural household cleaners, buy household furnishings made of natural fibers (instead of synthetic fibers that can “off-gas” volatile organic compounds). When painting, use VOC-free paint. Quit smoking, if you haven’t already. In some cases, source control must be done by a certified contractor. Asbestos should be sealed or enclosed (asbestos is not a hazard unless it is disturbed, at which point it can release a dangerous dust). Radon gas should be mitigated whenever possible by sealing cracks in the foundation where the gas enters, or by filtering the water supply if water is the source. Gas stoves can be adjusted to decrease the amount of emissions. Lead paint can be scraped off or covered with modern, lead-free paint (this is not a DIY job and requires EPA training).
  • And, don’t forget to install a carbon monoxide detector in your home, ideally next to the sleeping areas.

Tags: , , , , ,
Posted in Services | Comments Off

« Older Entries